U Shaped Adjustable Shower Curtain Rail for Stylish Bathroom Privacy

13 reviews for U Shaped Adjustable Shower Curtain Rail for Stylish Bathroom Privacy

1. 

   Hari M. – January 2, 2025

   Pleasantly surprised, indeed sturdy and works as advertised
   After attaching the ends to the walls, the corner (bend) does not sag or move up/down, and feels rigid and secure to the touch.I ordered the L-shaped, 133cm x 133cm model. In my case, one side of the L is almost 133cm, and the other side is about 70cm. I used screws to attach the ends to a brick + cement plaster wall, at a 7 ft. height.The acrylic discs should be used even when using screws. They are meant to be used in both cases – glueing or using screws. The larger diameter of the discs provides better grip and counter leverage against downward forces – especially at the (vulnerable) corner section.Like many other reviewers, i didn’t need to use the ceiling support wire cable for additional support for the corner bend. I have hung a 6ft wide by 7ft tall polyester shower curtain which isn’t too heavy anyway.So far so good!

2. 

   Pushpalatha – January 2, 2025

   Sturdy product
   The product is sturdy and of good quality it’s been in use for over a year now and I am very satisfied with the quality of the product.

3. 

   Naomi Howard – January 2, 2025

   Sturdy
   It’s sturdy and of good quality. The fit is perfect for our corner shower and it looks great. Installation was straight forward and quick.

4. 

   Krishnamurthy.Kavirayani – January 2, 2025

   Shower curtain Rod
   good one

5. 

   Divya Swaminathan – January 2, 2025

   Never to buy product.
   I purchase two. Both were so unsteady after putting the shower curtain. One fell on my child and injured him. I was so upset that i threw both. It’s unsafe. Someone who can sell such a product, i didn’t want to waste time returning the product too. Lost total trust. Donot buy. It’s a waste of money above all unsafe.

6. 

   Dharmendra Hiralal Patel – January 2, 2025

   One rod missing in the parcel
   I just received my order, but after unpacking I found that one rod is missing, there are only 2 rods. 😌😌

7. 

   Nafisah shakir – January 2, 2025

   U shaped curtain rod
   Package was torn and shabby missing partsOnly rcvd rods no base

8. 

   SATHYAPRAKASHA NARAYANA MURTHY – January 2, 2025

   Don’t buy
   Didn’t even last 4 months. Hanging loose already.

9. 

   Kenneth M. – January 2, 2025

   Easy to install

10. 

    Goal Digger – January 2, 2025

    Sturdy and has a nice clean look… form + function.After removing the standing shower unit that was 25 years old, replacing with this beautiful freestanding tub, I realized I really still need some sort of shower option, not just for me but for guests also. Following a whole lot of research and analysis paralysis I finally decided to try this shower curtain frame. I have a small tub in a fairly small space, so that eliminated a lot of other products.Yesterday was Thanksgiving and as with any good Thanksgiving day, it started with a small feast, followed by a couple of glasses of wine, and a little bit of motivation to start this project. I previously asked the bathroom contractor if he would install it and he really just ridiculed the design so I politely told him to bugger off, I would do it myself.As you already know, there are a lot of reviews for this particular product (and other similar products) but not very many details on the installation proces… yikes. so I went onto YouTube for the scariest part… to see how to properly install a wall anchor… wall anchors are intimidating, but Lowe’s has a great tutorial that made it look so much more simple.Gathered up my tools which included top off for my wine, cordless drill with 11/64 drillbit because I didn’t have 15/64 drillbit which is specifically what the instructions told me I needed… Nevertheless, I also grabbed a Phillips screwdriver, a hammer, measuring tape, sharpie, some painters tape to mark the distance on the wall that would be the centerpoint for the shower ring since my tub is centered, and the mirror is centered. A stool and step ladder.I measured the distance on shower ring posts, measured the wall, did some math and marked everything on the tape strip that I placed level on the wall… and then followed the instructions that were provided in the kit… step one assemble the ring and don’t over torque the screws, or you will strip them so be gentle, stop when the screw is snug. (The frame and all the parts are very lightweight, some sort of aluminum alloy? Sturdy but lightweight… So don’t eff that part up or you’re hosed.)Marked the three points for the first wall bracket, wall anchors… this next part was a little scary and it’s the first time I’ve done it correctly… Grabbed the drill, bored the holes and tapped in the wall anchors in. I had to loosen the holes with the drill a few times before the anchors tapped in without destroying more than one (only one extra is provided). Screwed in the first wall mount flange thingy… I knew it was at the proper point on the wall because I already had marked the level and distance across the wall with my blue tape… I set the first tube into the flange and set the second bracket up to mark and drill… next I asked my daughter to help me hold the whole shower curtain frame so that I could use the level on the frame and double confirm where to drill holes for the second wall mount/flange thingy on the other side. Finish that bracket up. Drill some more holes for the anchors, screw in the second bracket.Then just insert the two posts that go into the wall brackets, and your whole unit is ready to go… Tighten up the little screws underneath each of the wall mount brackets until you get the whole ring to be level, and you’re done.NOTE: on the wall brackets there are three holes for screws that will go into the wall anchors, and one screw that goes underneath where the shower frame tube is inserted. It’s critical that the little screw must be on the bottom and not the side or top because it is the load bearing edge to tighten and lift up the whole shower ring so that it doesn’t sag. You will notice the instructions that there are two exclamation points after this particular sentence, so it is very important 😊The only reason I needed to use the blue tape was to measure, and mark my wall to know exactly where I wanted to start the brackets from side to side and the distance from the ceiling… and to keep things centered with the tub and mirror. Maybe you don’t need this step but I like to be over prepared before drilling holes in my walls.Most of the time for this project was spent on preparations, drinking wine, reading instructions, looking for the correct drill bit, topping off wine, and general anxiety about being able to finish the project without asking for help. The actual installation was pretty straightforward.I love the results.Currently waiting on 180×65” shower curtain that arrives soon… still need to install a couple of hooks from the ceiling along with some white florist wire (because florist wire is malleable, but strong) and that’s how the shower wand (from the faucet) will hang in place above the whole shower ring.Update 01-DEC-2024 with video:The “not heavy duty” shower curtain I purchased from YISURE seller turned out perfect although I did cut off some of extra width… Maybe 18 to 24 inches. Still plenty left to overlap and make sure that the water stays in the shower. The frame is doing a fine job staying level and is 100% secure on the wall.Now you know what to expect. You’re all set!

11. 

    Theresa – January 2, 2025

    Works great

12. 

    Joe – January 2, 2025

    Love the product it was easy to install

13. 

    Christie Bigham – January 2, 2025

    Sturdy and not difficult to install